Sharply railways. Maincraft: Railway

In Minecraft, there are a large number of ways of movement - on land, water and even by air. One of the most affordable and important means is the railway, which can greatly relieve life in the game.

So, in order to acquire your own railway, where you can transport a large number of resources, you will need rails and trolley.

Rails in the game can be three species - ordinary, electric, as well as push.

To create ordinary rails, six iron bars and one stick are used. We have everything in the correct order on the workbench and we get rails.
Now it remains to be located on the blocks, with the result that they are united and the railway will turn out. Please note that such a road may not only be direct - you can install it under the tilt or with a turn.

For the crafting of electric rails, we will need much large quantity Resources, however, it is worth it. We have on the workshop six gold bars, red dust and stick.

That's all. Now we have them in the interval between ordinary. Their main role is that they can significantly accelerate the trolleys that move on them. By the way, such railings need to be included with torch or push rails. Last species You can use exclusively on a straight road.

Let's figure out exactly how to krafting push rails. We take six iron bars, red dust and push plate.

All, now you have your own rails and all materials for creating speed railway.

Of course, rails and railways are not enough to transport itself and resources. You must also create a trolley. For this we need five iron bars. If you want to develop a trolley with the engine, then you will also need a furnace.

If you want to put them on the railroad tracks, then simply select them and press the right mouse button. But if you have a desire to bring them into action, then you need to keep coal in your hand, which is fuel to work trolleys. You can get this resource deep in the mine. Remember that in mines are dark and full of various monsters. Therefore, do not forget to take a torch and weapon.

Thus, we learned how to create rails in minecraft. This subject It is very useful in that it is a component of the railway - the most affordable and fast vehicle movement in the game. Even the boat on the water can not move at such a speed as a trolley on rails. In addition, it provides the ability to transport a large amount of resources.

Or make the way to inclined so that the trolley can accelerate giving off the mountain. Unfortunately, both options are not very good: the trolley with the oven speed is less than the player, but to keep all the time the necessary slope of the paths is quite difficult.

KPD: minimum.
Disadvantages: Difficulties with acceleration of trolley.

Simple two-way paths

Second on ease of the type of railway. It is built similarly to single-band paths, but it will be necessary at least 2 times the rail to create a simple type of railway. The ends of the paths must be combined with each other so that the trolley can endlessly ride along the paths in one direction.

For this type of railway, the trolley with the stove is best suited - it will be able to move until the fuel end.

KPD: coal).
Disadvantages: With each new activation, the trolley with the stove is driven to the opposite of the one in which she drove last time. It creates some difficulties (provided that the trolley with the stove pushes other trolleys).

Challenged paths

They are built as one-band paths, but the ends of these paths should form a loop so that the end of the loop looks toward the opposite end of the paths. When creating such paths, you should not forget about the "Southeast Rule": the trolley always seeks to turn or south, or east.

For overclocking on such paths, a trolley with a stove is best suited.

KPD: The average (one carbon is coming to each trip).
Disadvantages: Because of the "southeast rule", it is difficult to create the right loops. However, next to the arrow can be put a lever that will force the trolley to turn into the desired side.

Electric paths

On the this moment The easiest and fast view of the paths - the trolley will be able to move endlessly, without the cost of fuel. However, such rails are pretty roads in the construction.

Ways with accelerator (Does not work with the version of beta 1.6 and later)

They represent the usual ways, but the acceleration of the trolley is carried out using an accelerator. This type of paths was often used before the update of Beta 1.5, in which the electrical paths appeared. The electrical pathways are more efficient, but the accelerator can still be used at the initial stages of the game, while the player does not have enough gold to build the latter.

Kpd.: >100%.
Disadvantages: The accelerator is a fairly bulky design. Trolley can stop if something hurts to go (for example, mob on the paths).

Weak accelerator

From version 1.2.4, the accelerator is reappearing again. A bug is taken beyond its foundation if a player or mob is located in the trolley, then the trolley passing by the trolley gets a weak push.

Building

1. Put the block near the railway.
2. We put the rail block, and then another solid block.
3. At the railway block, we put the trolley and plant a mob in it.

KPD: 100%

Disadvantages: Very small acceleration, it is easier to use electric rails.

Paths with a small accelerator

They are built like this: every two blocks the block and the rails are put on them, it turns out something like this:

• Modifications of paths

  Railway branches

  Rails, under the influence of red dust or mechanisms, can change their direction. This can be used both to create conventional railway development and to create complex railway control circuits.

  When switching the rail, the Southeast Rule is valid for them.

  Dynamic lighting

  Using push rails and red torches it is possible to create dynamic lighting of paths. To do this, you need to install push rails and connect lamps to them, or red torches through the inverter (which is less efficient).

  Features Building

  Trolley

  Trolley can only be installed on rails (any), and only on the rails they will move freely, otherwise they simply freeze until they start to push. There are only 7 types of trolleys:

  They can sit down the player and mobs, they can be pushed or dispersed with electric rail or trolleys with a stove.

  Used to transport things.

  Trolley pushing other trolleys. Electric rails do not have any influence on it.

  The trolley exploding when hitting activated activating rails, when the explosion does not destroy the rails and blocks on which they stood.

  From version 1.5.0, rails can be put on the chests and other funnels, if you sit down. The trolley with a funnel will transmit things in a chest / funnel located under the rails.

  Performs a command when drives through activating rails.

  This trolley is a mobile spaner, so it is worth using for a spa on a specific path.

  Gorki

  When descending from the slide, the ordinary trolley is accelerated, and the trolley with the stove does not change the speed.

  To lift the trollee in the mountain, it is necessary to inform her enough energy. The furnace trolley can raise several other trolleys to the mountain if she managed to accelerate horizontally. Electric rails can be installed and when lifting the mountain, as needed.

  Diagonal paths

  If you lay the rails like on the picture on the right, the trolley, despite the seeming impossibility of a normal trip, will move normally in a straight line, without shaking. Although it will hesitate between two opposite positions, but the player will notice it only by changing the texture, it does not affect the mechanics, even the trolley with the stove will continue to go normally. This increases the possibilities of railway communications on the coverage of the territory, also allows you to make more rounded turns on which it shakes noticeably less.

  Damage to paths

  Water, lava and explosions destroy rails. To this not happen, you need to follow several rules:

  • Maximize the rails from the water and lava.

  If the rails go below the nearest water source, then be prepared for the fact that they can be flooded in the event of an attack of the griffers, explosion of criesters or a random subtop of the water reservoir wall. Water simply mocks the rails, the lava will also burn them.

  • Beware of cries.

  Crypers can explode, bringing not only land, but also rails near the explosion place. Therefore, it is not recommended to ride at night and in the morning on rails, not fenced fence or impassable blocks. The radius of the destruction of the rail on 1 cell is greater than the explosion radius.

  • Do not arrange mine fields next to rails.
  • Beware of gasts.

  If you decide to build rails in hell, then take care of the gasts. They can blow your ways.

  In order to determine the status of paths in a timely manner (they are or destroyed), it is possible to pave a red dust path with repeaters and put it in the beginning of a red torch. If the wire is bred by an explosion, he will "go out".

  Other

  In the game it is impossible to disperse several trolleys at once on some ways. (Only if they do not push the trolley with the stove) - At the turns, they hit each other and the trolley, which is ahead, transfers the one that is behind it, the impulse that makes it move in the opposite direction.

  Railway station

  Very often there is a need to supply railways to stations so that you can easily move between the house, shaft, pond, forest, a farm without transfers. In general, the stations are a very useful thing. The station should be able to accept the trolley and send it to any side (forward or backward) without destruction. Exist different variants Stations, but the simplest and functional are presented below.

  When building a station, you first need to pave the rails, demolish the curved rail and put it again. After that, the wire to it must be put on the button opposite to the side of the bells of the rail (as in the picture). Do not forget to put a rail-button from the same side, otherwise the trolleys will slip this station. And do not forget to remove the trolleys from the rail after use, or make a bus station like this:

  Automatic station

  Sooner or later you get tired of shooting trolleys with a rail, or you may have an emergency when you forgot to remove the trolley. In this case, you should build a station with two \\ three \\ four (1 way to each trolley) finite ways. The easiest example: you decided to build the railway with each other to share resources. But what if when you already have one trolley, your friend will send another one? Then she will not be able to turn out normally, and maybe go back.

  Red dust straight to the arrow. Do not forget to install a repeater to the maximum delay: otherwise the trolley will not have time to call for adjacent paths (the arrow switches right in front of it). If you did everything as on the screenshot (fence and lighting are optional: just the author interfered with the mobs very much), any trolley caught on the occupied parking lots will fade in pockets to the first free slot (unfortunately, the trolley standing on the push rails needs to be woven that levels all automation . However, leaving the trolleys will be "directly" without going to each pocket). The theoretical capacity of such a station is unlimited: it is enough to remake additional slots like the right in the screenshot.

Decide, the railway network of which length you want to build. The length of the network is not limited, but you need to approximate how many blocks it will take and how many rails will go.

• Try to go from the intended start of the railway until its end. This will help you plan the route, and also find out what obstacles are on the way.

Remember the components of the railway. To build a railway network, you will need four main elements:

• Trolley - means of movement on rails.
• Rails - Ordinary rails for which the trolley moves.
• Electric rails - Rails, which are activated by a red stone and accelerate the trolley (or do not give it to slow down). If the electric rails are not activated with a red stone, they will slow down (and ultimately stop) the trolley.
• Red torches - Power supply for every 14 electric rails. Such torches are not needed for ordinary rails.

Collect the necessary resources. To create a railway network, you will need the following items:

• Iron bars - Every 16 rails can be screaming out of six iron bars. The trolley is made of five iron bars. To get iron bars, overpow the iron ore in the furnace.
• Sticks - For every 16 rails, one stick will take. Also need one stick to scream one lever and one red torch. To get four sticks, add two boards (one above the other) to the workbench.
• Gold bars - Used to create electric rails. For every six such rails will leave six gold bars. To get one gold ingot, remember gold Ruda in the oven.
• Red stone - Get the red stone with iron picka (or better).
• Cobblestone - To create one lever, you will need one cobblestone.

Open the workbench. To do this, put it on the ground and right-click.

Create a trolley. Add one by one iron Blutch To the top left, the top right, the middle left, central and middle right workbench, and then drag the created trolley into your inventory.

Scratch the rails. Add one iron slope into all the slots of the left and right columns of the workbench, add one stick to the central slot, and then drag the rails to your inventory ..

• It turns out 16 rails; If you need to create more rails, increase the ingredients for crafting accordingly.
• On the console, go to the "Red Stone and Transport" tab, select the "Rails" option and click "A" or "X" until you create enough rails.

Scratch electric rails. Such rails need significantly fewer normal. Add one by one gold ingot in each slot of the left and right table of workbench, add one stick to the central slot, and then add one red stone into the lower middle slot. Now drag electrical rails to your inventory.

• So you scratch 6 electrical rails; If you need to create more such railings, accordingly increase the ingredients for the crafting.
• On the console, go to the "Red Stone and Transport" tab, select the "Rails" option, scroll down to the "Electric Rails" option and press "A" or "X" until the rails are enough.

Building the railway in Minecraft is quite simple, but having a number of nuances process. First you need to scaffle the trolley and rails. This is reported by the experts of the "Hi-Tech" section of the Edition for Investors "Birzheva Leader".

Simple single-band paths.

The simplest view of the railway. To build them, you need to install all rails one by one by one, after which it is possible to limit the ends of the paths with opaque blocks.

You can overclock the trolleys using trolleys with a stove or make part of the path by inclined so that the trolley is accelerated by moving from the mountain. Both of these options, unfortunately, are not too good: the speed of the trolley with the stove is even less than that of the player, and all the time keep the necessary slope of the paths is quite difficult.

Disadvantages: difficulties with acceleration of trolley.
KPD: minimal.

Simple two-way paths.

This is the second on the simplicity of the railway. It is fully built similarly to single-band paths, however, you will need at least twice the number of rails to create a simple type of railway. The ends of these paths must be combined with each other, thanks to which the trolley will go in one direction along the ways infinitely. For this type of railway, the trolley with the stove is best suited - it is capable of going until the fuel end.

Disadvantages: Each new activation The trolley with the stove will go to the side opposite to the one in which last time he drove. It carries certain difficulties (provided that the trolley with the stove will push other trolleys).

Charmed paths.

They are built on the principle of single-band pathways, but the ends of these paths should form a loop in such a way that the end of the loop is sent to the opposite end of the paths of the side. However, when creating such paths, it is not necessary to forget about the "southeast rule": the trolley seeks to turn to the east or south. To overclock these paths, the trolley with the stove is best.

Efficiency: medium (one trip is needed one piece of coal).

Disadvantages: In view of the "southeast rule", create the right loops is quite difficult. Although the arrow can be installed next to the arrow, which will force the trol in the desired side.

Electric paths.

At the moment, this is the easiest of all kinds of ways - on them any trolley can move endlessly, while not spending fuel. However, such railings are fairly roads in the construction. You need simple rails, push rails and electric rails, as well as levers or red torches. The lever is the cheapest option, especially considering the fact that there will be quite a lot of red dust on electric rails. At first, just start laying the way from ordinary rail, inserting electric rails every 25 blocks. Electric rails give a trolley enough energy so that it was able to drive 64 blocks, but in order for the trolley to damage the speed, they need to put them every 25 blocks. If you want for such railings, simple trolleys or trolleys with chests could be fluently moved - it is necessary to put electric rails every seven blocks. It is worth considering that the rise in the mountain is heavier work, so before lifting the trolley it is necessary to transfer more energy. For this, a few electric rail can be installed in a row.

In order to activate electrical rails (and in the off state, they will simply stop the trolley), it is necessary to install one lever or a red torch next to them. Near electric rails instead, pressing rails can be installed (in such cases they will be activated only when trolley erupts), however, you will have to use more resources.

Using the ability of electric rail to overclock or stop the trolley, you can create quite convenient stops - as soon as the trolley arrives at the stop, it will stop, but when you click on the button - it will go further.
Recall