Game console Sony. PlayStation 3 today still enjoys wide popular among gamers, often due to exist exclusive games that are not ported to the next generation. To install applications with great comfort, you can use the Flash-storage device.
We will skip the installation of custom firmware or ODE to the console, since this process needs to be considered separately from the question of the game. At the same time, for subsequent actions, this is a prerequisite, without which this instruction does not make sense.
Step 1: Preparation of removable media
First of all, you must select and correctly format the Flash drive, which is planned to be used to install games on PlayStation 3. For these purposes, almost any removable disk is suitable, be it a USB flash drive or a microSD format memory card.
The only significant difference between the drives is in the data transfer rate. For this reason, the USB flash drive is more suitable for this task. In addition, not all computers are equipped with a microSD connection kit.
The amount of memory on the disk must fit your needs. It can be like a flash drive on 8 GB and an external USB hard disk.
Before downloading and adding games, a removable disk should be formatted. To do this, you can resort to standard tools. operating system Windows.
- Depending on the variety of the Flash drive, connect it to the computer.
- Open section "This computer" And right-click on the disc found. Select "Format"To go to the window with special settings.
- When using external HDD, you will need to use special software to format it. "FAT32".
- Here is the most important list "File system". Expand it and select Option "FAT32".
- In line "Size Distribution Unit" You can leave the value "Default" or change it on "8192 byte".
- Optionally, change the Tom label and install a tick "Fast (cleaning table of contents)"To speed up the procedure for deleting available data. Press the button "To begin" To initiate formatting.
Wait for notifying the successful completion of the process and you can move to the next step.
If you have any difficulties or questions about the described actions, you can familiarize yourself with the more detailed instructions for solving the most common problems. We are also always glad to assist you in the comments.
Let's look at two possible options how to install the game on PS3. The first option is to install the game on the hard disk of the console itself, and the second is the ability to play the game installed on the outer carrier.
Preparing PS3 to install games
In order to play on PS3 in various games without disks, we will need special programs. The programs you want to download are called BlackB0x FTP and Open Manager, and you can download them here: narod.ru. Files with programs from this archive must be copied to a USB flash drive, after formatting it in FAT32 format. Now we translate the prefix to Jailbreak mode, for which we first de-energize PS3: take out the cord from the outlet or if there is a special toggle switch, turn off it. Now in the USB port of the console, we insert our cracker and turn on the console, after which you press the "POWER" button and then "Eject" is a button designed to extract the disk. We go to the "Install Package Files" menu and find our packages there for installation of BlackB0x FTP and Open Manager. We set them in turn with the "x" button and see whether the relevant items appeared with the names of the programs in the "Game" menu. If everything is in order, take out the flash drive and proceed directly to the installation of the game.
How to install the game on PS3 on HDD consoles?
This method is good because it allows you to play games of any size, and not just up to 4 GB, as is possible from an external hard disk. To start, check if Total Commander is installed on your computer. If so, then everything is in order, if not, download it from here: "Total Commander - V8.01 Final" and install. Now with a switching cord we connect the PC and the console. In the console we go to the "Settings" item, then in the "network settings" and in the "Internet connection settings", where in the "setting method" select "Special", in the column "Connection method" - "Wired", in the column " The network device mode "set to" determine automatically "and, finally, in the settings of the IP address, select the" manually "item. Now set up the connection, for which we use the following IP address: 192.168.1.2. In the column "Subnet Mask" exhibit 255.255.255.0, and in the "Router by default" and "main DNS" set 192.168.1.1, and additional DNS leave, as is. In MTU, I exhibit "automatically", the proxy server is not using, and for UPNP, use the "Enable" mode.
We continue to install
By the "x" button, save the settings and go to the BlackB0x FTP program in the "Game" menu. In the Total Commander program on the PC select "Network" and then: "Connect with the FTP server". Click on "Add" and in configuration of the FTP connection exhibit PS3 for the name of the connection, 192.168.1.2:21 for the server, and the account with password is left empty. After that, connect with the selected connection. In the menu that appears, select the directory called Dev_HDD0 and go to the "Game" menu and in Oman46756. In this directory, create a folder called "Gamez" where using the F5 button and copy the folder with the desired game. After the copying process is completed, we leave the BlackB0x FTP program and run Open Manager in the "Game" menu. On the question of using OMAN46756, I answer "Yes" ("Yes"). Now choose the game and press "X". The game will appear here in this directory: * / app_home / ps3_game / Note the fact that not all games can work without a disk, but there is a way out. If any licensed disk from PS3 has been lying around, then run Open Manager again and insert your drive into the drive and press "X" after selecting right game - The console will define it as the original disk for the installed game.
How to install a game on PS3 with external HDD?
As we have already noted, this method is somewhat worse due to the fact that from the external medium it is impossible to run games, the size of which exceeds 4 GB (due to the features of FAT32 format). In addition, in the process of playing from an external hard disk, errors can be observed and low speed (due to the fact that the USB connection speed is not as fast as the data transfer rate on the usual HDD). To start the game with an external HDD, you need to format it into FAT32 format, create a "Gamez" folder on the disk and copy the required games there. Running games is also carried out using Open Manager. Well, now you know how to install the game on PS3.
According to information resources: forums, sites and blogs - walking the erroneous opinion that for gaming playstation consoles 3 Suitable wheels with hacked games. If this trick was worked with the devices of the old generation, then today they will not have any effect, as the developers carefully follow their profits and stop the ability to use non-license products. However, ingenious users have found a way out of the situation that is still able to save you from buying expensive exclusive.
"If the mountain does not go to Magomed, Magomed will go to the mountain," this is how Greek wisdom sounds, which has come down to our times. Thanks to an extraordinary approach, users were able to detect the console vulnerability, which is to record games on the inner hard disk of the device, from where the installation of the products you are automatically started. However, how to download games on PS3?
FTP connection
One of the fastest and efficient data transmission methods is a direct console connection to a personal computer. Of course, you can use a wireless data transmission system, however, the connection of the cable will provide not only the stability of the network, but also high speed. Given the weight of modern exclusives, this parameter will be key to you.
After connecting, run the Multiman program and switch to a personal computer. Already on this device launches the FTP client for data transfer: one of the most optimal options is Filezilla, the loves of the public and web developers.
When you first start the MULTIMAN program, the Games folder, located on dev_hdd0, should appear on your gaming console. It is in it that needed downloaded games, regardless of the size or genres. Please note: Cyrillic should not be in the game name - exclusively Latin letters!
Upon completion of data transfer, restart Multiman or click the SELECT and L3 buttons combination on your joystick so that the downloaded game is displayed in the content list.
Outdoor HDD
In this data transfer method, it is important to make sure the file system of an external hard disk. How to do it - you can read on the pages of any information resourceTherefore, we simply note that you can only work with FAT32 and no other system. If everything is in order, then you can safely start actively!
For PlayStation 3, it is absolutely no matter what is the repository of your game: an external hard disk, a flash card or a memory card. The only nuance - do not use old devices, as they are distinguished by low bandwidth.
By connecting the device to a personal computer, create a "Games" folder on it, where all downloaded games will be downloaded. Please note that the name of the folders with the games must be exclusively on english language (More precisely written using Latin characters).
When the data is complete, we go to the gaming console and connect an external device to it. Next, run the Multiman program and wait for the game library update. As soon as the exclusives appeared in the update list, you can proceed to their passage. Good luck!
On PlayStation 3, a pirate is a bunch of files. This is not an image and nothing else. Simply put - a copy of the disk.
In order for this pirate to play you need to pour it on the inner playStation disk 3. Make it in several ways. BUT B. this case It will be about fill games on the FTP protocol. It is also possible to play from an external hard, but it's all we will continue to lower. We are discussing only FTP.
What do we need?
If through the router (the best option)
1. Computer, PS3, router.
2. All this is connected by cables.
2.A. Why cables? Can WiFi, but most often the transfer rate is below.
PS3 settings:
We go ...:
Settings -\u003e Network Settings -\u003e Internet Connection \u003d Included -\u003e Internet Connection Settings -\u003e Special -\u003e Wired Connection -\u003e Determine Automatically -\u003e Automatically -\u003e Do Not Install -\u003e Automatically -\u003e Automatically -\u003e Do Not Use -\u003e Enable.
Everything is very simple. At the end of the settings will pass the connection test. Must be Success everywhere.
1. Download FTP server
2. We throw the PKG file to the USB flash drive, set it on the PS3. After installation in the "Network" section at the bottom of the menu, the server icon appears. Run it! He will show you the IP which received PlayStation 3. I recommend installing the FTP server marked nopass.. It will get rid of the need to put a password and login.
2.A. There are other ways to learn IP. There is also a way to specify it. But I choose a simple option.
3. Next, swing Total Commander. Install. Run. If the link does not work - shakes from here.
4. Next to the menu, select FTP -\u003e connect to the FTP server ... -\u003e Add ... -\u003e Enter the data for the connection:
Connection Name: PlayStation 3
Server: Enter the IP that the FTP server on PS3 shows here. For example, 192.168.1.101
The checkup fields and password are left empty. On requests for entering this data, click OK and all.
5. After saving the new connection named PlayStation 3, you can highlight it and click -\u003e Connect.
You will find a list of directories (folders) on the inner hard PS3.
We go to the folder dev_hdd0.further to the folder game., I create a folder in it LAUN12345. (F7 button on the clavelength in Total Commander), in the created folder, create a folder Gamez.. Open it.
That's it in the folder Gamez. You must throw your games.
I explain ... in the folder Gamez. You throw a look folder BLES01047..
!
Current Backup Manager. "S support reading games from the folder dev_HDD0 / Games. You can create this folder and throw games in it.
When the game is thrown, go to the multimeter ... and the toy is already there. You can play.
We pass the game.
Immediately it is worth noting the fact that FlashXP must be installed on the computer. Now let's look at both methods.
on thePS.3 With cable?
First, connect the console with the computer using the RJ 45 cable through a special connector located on the back wall.
On PlayStation 3 as follows:
We go into connection with the Internet, where we choose:
Wired connection method.
Special setting method.
Automatic determination of the network device mode.
Setting up an IP address must be done manually.
Now on the computer goes to the "Start" menu, then the "Control Panel" menu, click here "Network and the Internet", where we select View the network status. After the transition window opens, where you can see the "Changing Adapter Parameters" item, click on it.
In the window that appears, click on the required adapter and go into its general settings, after which you press "Properties", "Internet version 4" protocol, and here we again open the "Properties". After you specify the unique IP address of the adapter.
We run in the console the program called BlackB0x FTP Server.
This program must necessarily seem the IP address that you entered in the console settings.
Immediately it is worth noting the fact that different IP data, DNS and others can be different for users, so they should be clarified to start the games on PS3. Also, many prefer to play some games from past versions of this console. Since it is quite possible to start the PS2 games on PS3. Thus, many are coming.
If you do not know the way to install through the program and how to run games on PS3, it is done as follows:
In the program menu, click the "Session" button, after which you select "Quick Connection".
Press the connection button, after which you see in the right window the full structure of all console folders. Now in the left window we find the folder with the game you need and move it to the PS3 section. The location of the game should depend on the testimony of the installed backup manager.
Game prefix Sony. PlayStation 3 by itself is expensive pleasure, and considering that licensed games are also worth a lot, to know how to install the game on the HDD console, very useful. Lung and quick way to do this, unfortunately, does not exist, but if desired everything is possible. We will have to do a little with the programs and settings.
The official firmware does not provide for the possibility of installation on PS3 unlicensed games. In order to pump any games, you will need a jailbreak (a special device connected to a USB port, intended to bypass restrictions in the work of the console) or self-made (custom) firmware. If this question is resolved, you can start searching and downloading the following programs:- BlackB0x FTP - to transfer files to the FTP console;
- Open Manager (or Multiman Manager, or Backup Manager) - to run, copy and patch game;
- Total Commander, if on your computer it is not yet installed.
Go to the network settings of the computer. Connect the console to the computer using a power cable. Next, you need to change the adapter parameters. To do this, open the "Network and Internet" section, click on "View network status and tasks", and then to "Connect over the LAN". By clicking the "Properties" button, find the Internet version 4 Protocol item. Set the IP address 100.100.10.1, subnet mask 255.255.255.0. To configure data transfer between the computer and the console, in the "Network Settings" section of your PS3, the following must be specified: IP address 100.100.10.10, Subnet mask (or Subnet Mask) 255.255.255.0, Main Gateway 100.100.10.1 and Additional DNS Address 100.100 .10.2. Save the changes and run the BlackB0x FTP.
On your computer, open the Total Commander, click on "connect to the FTP server" in the "Network" menu. Add a new connection - in the IP Prefix field, enter 100.10.10.10, do not specify anything else. After installing the FTP connection on one of the Total Commander panels, you will see the contents of the PS3 hard disk. Next is the case - copy the folder with the right game to a specific directory on HDD PS3:
- if you installed Open Manager, open the "dev_hdd0 / game / oman46756 /" directory and create a Gamez folder there;
- for Backup Manager Game location path - "Dev_HDD0 / Game / Laun12345 / Gamez / ...";
- for the correct operation of "Multiman Manager" playing in the folder "Dev_HDD0 / Games / ...".
The copying process can last for quite a long time.
As soon as the data transfer ended, run Open Manager, confirm the option "Oman46756" folder, select the game and click "X" to start. It happens that some games without disk are not launched. In this case, insert any license disk into the drive (only for PS3) and run Open Manager again. This simple trick will help, and the game will work.
By the way, using Open Manager games occupying less than 4 GB, you can run from a flash drive, where the game files are accommodated in the same way in the "Gamez" folder.
PS3 novice users are often asked questions: "What methods installing games on PS3 exist?", Is it possible to play PS3 from different carriers? " And others. On these and other questions we will try to answer this article in more detail. To avoid abnormal situations with your device, follow the carefully presented instructions, and try not to make mistakes.
There are two options to play PS3 without the original disk with the game:
I. Installation and subsequent use of the game on HDD consoles PS3
1) To begin with, it is required to prepare a console to install. To play without disks, you are required specifically designed for this application. These include:
- BlackB0x FTP;
- Open Manager.
Find them on the Internet will not make problems.
2) Download the program listed above. We take the appropriate flash USB and format it in FAT32 format. We download programs on the USB flash drive.
3) The next action you want to translate the console to Jailbreak mode. To do this, you must first delay the PS3, that is, remove the cord from the outlet, or you can still, if it is provided, disable a special toggle switch.
- In the USB port of the console, we insert our Crack USB flash drive and run the prefix;
- Press the "POWER" and "EJECT" button sequentially, the latter is designed to extract the disk;
- We carry out the entrance to "Install Package Files";
- We are looking for packages with Open Manager, as well as with BlackB0x FTP (in this menu);
- We perform alternately by installing them through the "x" button. Do not forget to check whether items appear with names in the "Game" menu;
- After successfully installing both programs, take out a USB flash drive and go to the next step - installation of the game.
5) Now consider how to install the game on the hard disk consoles:
5.1) To begin with, we will need to download and install on the Total Commander, if it is not yet (if there is, we skip this subparagraph and go to the next);
- in the "Setup method" item, select "Special";
- "Method of Connection" - Select "Wired";
- "Network device mode" - "Determine automatically".
- IP address → 192.168.1.2
- Subnet mask → 255.255.255.0
- Router by default → 192.168.1.1
- The main DNS → Similar to the previous one ( 192.168.1.1 )
- The remaining graphs leave empty.
5.4) In the "MTU" point, exhibit "automatically".
5.5) "UPNP" → Enable.
5.6) the proxy server will not need to use. Save settings button "x" and go to the "Game" menu. We find our recently installed BlackB0x FTP program and launch it.
5.7) Go to PC again, namely to Total Commander. In Total Commander, select "Network" and find the tab there "Connect with FTP server". We enter into this tab and click "Add", and in the connection setting, exhibit:
- The name of the connection is PS3;
- Server - 192.168.1.2:21.
The rest again leave empty.
5.8) Connect with this connection and see that the menu appears in which we need to select a directory with the name Dev_HDD0, then go to the "Game" menu → oman46756.
5.9) Create a folder in this directory, and you can call it anywhere, but it is better to call "Games" for convenience.
5.10) Copy the selected game for PS3 to this folder. After completing the copying process, you need to exit the BlackB0x FTP program.
5.11) Run the Open Manager program (it, as you remember, is in the "Game" menu). You will be asked about using the OMAN46756 to which you want to answer by pressing the "Yes" button ("YES").
5.12) Choose a copied game and press the "x" button again (the game will be displayed in the catalog * / app_home / ps3_games).
We can play. If it does not start, see paragraph 6.
6) sometimes it happens that the game still does not go without a disk, then you just need to insert into the drive any licensed disk for PS3After having previously running Open Manager and selecting the desired game, click "X". The console must determine this disc as the original disk installed game.
II. The second way: start the game from external media.
Now consider the second way to start the game on PS3, it is somewhat worse, because, due to the features of FAT32 format, the game cannot exceed 4 GB sizes. There may also be a low speed and some errors, because the speed of the USB connection is significantly lower compared with the data transfer rate from a conventional hard disk.
1) As mentioned above, it is necessary to format the external medium in FAT32 format and create the "Games" folder on it.
2) You need to copy the desired or necessary games to this folder.
3) The media must be inserted into the USB port of the console itself and, again open in the "Game" menu Open Manager program and run the game.
Of course, these methods have their own positive and negative sides, but choose you. This will simplify the use of PS3, save a certain amount of money to buy original disks.
Let's look at two how to install the game on PS3. The first option is to install the game on the hard disk of the console itself, and the second is the ability to play the game installed on the outer carrier.
Preparing PS3 to install games
In order to play on PS3 in various games without disks, we will need special programs. The programs you want to download are called BlackB0x FTP and Open Manager, and you can download them here: narod.ru. Files with programs from this archive must be copied to a USB flash drive, after formatting it in FAT32 format. Now we translate the prefix to Jailbreak mode, for which we first de-energize PS3: take out the cord from the outlet or if there is a special toggle switch, turn off it. Now in the USB port of the console, we insert our cracker and turn on the console, after which you press the "POWER" button and then "Eject" is a button designed to extract the disk. We go to the "Install Package Files" menu and find our packages there for installation of BlackB0x FTP and Open Manager. We set them in turn with the "x" button and see whether the relevant items appeared with the names of the programs in the "Game" menu. If everything is in order, take out the flash drive and proceed directly to the installation of the game.
How to install the game on PS3 on HDD consoles?
This method is good because it allows you to play games of any size, and not just up to 4 GB, as is possible from an external hard disk. To start, check if Total Commander is installed on your computer. If so, then everything is in order, if not, download it from here: "Total Commander - V8.01 Final" and install. Now with a switching cord we connect the PC and the console. In the console we go to the "Settings" item, then in the "network settings" and in the "Internet connection settings", where in the "setting method" select "Special", in the column "Connection method" - "Wired", in the column " The network device mode "set to" determine automatically "and, finally, in the settings of the IP address, select the" manually "item. Now set up the connection, for which we use the following IP address: 192.168.1.2. In the column "Subnet Mask" exhibit 255.255.255.0, and in the "Router by default" and "main DNS" set 192.168.1.1, and additional DNS leave, as is. In MTU, I exhibit "automatically", the proxy server is not using, and for UPNP, use the "Enable" mode.
We continue to install
By the "x" button, save the settings and go to the BlackB0x FTP program in the "Game" menu. In the Total Commander program on the PC select "Network" and then: "Connect with the FTP server". Click on "Add" and in configuration of the FTP connection exhibit PS3 for the name of the connection, 192.168.1.2:21 for the server, and the account with password is left empty. After that, connect with the selected connection. In the menu that appears, select the directory called Dev_HDD0 and go to the "Game" menu and in Oman46756. In this directory, create a folder called "Gamez" where using the F5 button and copy the folder with the desired game. After the copying process is completed, we leave the BlackB0x FTP program and run Open Manager in the "Game" menu. On the question of using OMAN46756, I answer "Yes" ("Yes"). Now choose the game and press "X". The game will appear here in this directory: * / app_home / ps3_game / Note the fact that not all games can work without a disk, but there is a way out. If you have any licensed disk from PS3, then run Open Manager again and insert your drive into the drive and press "X" after selecting the desired game - the console will determine it as an original disk for the installed game.
How to install a game on PS3 with external HDD?
As we have already noted, this method is somewhat worse due to the fact that from the external medium it is impossible to run games, the size of which exceeds 4 GB (due to the features of FAT32 format). In addition, in the process of playing from an external hard disk, errors can be observed and low speed (due to the fact that the USB connection speed is not as fast as the data transfer rate on the usual HDD). To start the game with an external HDD, you need to format it into FAT32 format, create a "Gamez" folder on the disk and copy the required games there. Running games is also carried out using Open Manager. Well, now you know how to install the game on PS3.
PS3 is the predecessor of modern PS4 and refers to the seventh generation of consoles. It is worth paying it due, despite the fact that game Market Now it is more in demand that the fourth "fluff", the popularity of the third has not yet been faded. She still enjoy almost all over the world. Its a variety of functions with high probability will help her to stay afloat for a long time. You can enjoy watching movies, listen to music, go online and even hang on YouTube!
However, in many respects its attractiveness for the modern audience, PS3 is obliged to exclusively. Of course, now many of them are gradually transferred to the next generation. However, some are still true to the initial console.
Moreover, thanks to some firmware, users can install games on PS3 from a flash drive. How exactly can this be done, tells in this article.
Why use this method?
Despite all the advantages of the console, its main problem for gamers, especially for those who are a resident of the CIS, lies in the overestimated cost of applications. The fact is that for each region (the American segment, the European segment, the Russian segment, the Japanese segment, etc.) is set to its price. In our country licensed copies Games are sold at a fairly high cost. It depends on the relations of the ruble to the dollar. If in 2017 the cost in the American store remained almost unchanged, then in Russian, she noticeably soared up.
It is because of this problem, more and more users are interested in how to install games from a flash drive on PS3. And it is not surprising at all. After all, you can save a lot of money. Let's just say that this requires a special firmware of your console. However, it is not worth thoroughly to consider this question for each gadget. For an example, you can take already hacked PS3.
Prepare the console
Menting on the firmware, it is impossible not to say at least a few words about what it is and where it can be reached. Any standard PS3 has a factory setting that protects it from piracy. Therefore, almost any manipulations with a flash drive are impossible. To do this, it is necessary to put a custom firmware, thereby resolving access to the external non-license zero.
Now it can be put on almost any console. The only version that has not yet acquired its upgrade is Super Slim, which has been released at sunset seventh generation.
Successfully replacing the firmware, you can work with external media. Will it be possible to start the game on the PS3 from the flash drive? Not yet.
Format external carrier
To start the game from a flash drive to PS3, it is necessary to prepare directly the external carrier itself for further operation. The correct is very important, since otherwise your prefix will not be able to correctly consider the information.
You can format the USB flash drive yourself, using a computer or laptop. It is very important to save all the files from your drive somewhere in another place. After the format is completed, they will be deleted. The file system should be called FAT32.
After you finished with this (the formatting manual can be found in free access), create a folder on a clean flash drive. It must be called Games. It is here that you need to throw off all the files that you download a little later.
Now it is worth considering how to install the game on a flash drive so that the prefix can see it. To do this, download the file, as usual using any torrent convenient for you. Then check everything around. For you, folders with PS3_GAME and USRDIR names are important. If there was no inside, it means that this distribution is not suitable for further use. It is also worth paying attention to the fact that the Russian alphabet is missing in the names.
The FAT32 system has a limit on file entry - only four gigabytes. Help in records of files that exceed the data of the dimensions must be the SPLIT4GB program.
Run and install files
Now consider the procedure for how to install the games on the PS3 from the flash drive. If all the instructions mentioned above were clearly followed, the next step is to start the Multiman program. It will open all the files recorded on the flash drive and will help them recognize them.
Also take care to throw the following programs in advance: BlackB0XFTP, OpenManager and TotalCommander. They will need to be copied to PS3, after which we will have the ability to set unlicensed files.
Summarizing
Now you know the algorithm of how to install games from the flash drive on PS3. The console protection system is constantly improving and complicated. However, not in the case of PlayStation 3. The forces of hackers were hacked almost all versions. Of course, you should not forget about Super Slim. It is recommended to go around the side and choose the prefix that came out a little earlier.
MMC and SD memory card overview, as well as PRETEC card reader
Space rainders race
Sacred, Prehistory, Game World, Map, Regions Ankaria All tasks on the map of Ankaria Sacred
Xenus 2 WHITE GOLD V 1.1 Passage. Passage. Friends, enemies and other
Didactic games profession